Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14.16:00 — HP DesignJet L26500

Code: 14.16:00

Description: AC voltage too high on the Curing Module. AC Voltage too high. The voltage value detected that is going to the Curing module is higher than expected. The correct voltage is calculated by the firmware using the current measured by the Heaters Control PCA and the resistor values stored in the NVM.
Remedy: • Check if the voltage of the customerLs site is too high. • Check the resistance values , if they are too low, replace the Curing Heaters . • Replace the Heaters Control Assembly  (60 inch.).

← Xem tất cả mã lỗi HP DesignJet L26500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie