Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14.17:00 — HP DesignJet L26500

Code: 14.17:00

Description: AC Voltage too low on the Curing Module. AC Voltage too low. The voltage is calculated by the firmware using the current value measured by the Heaters control PCA and the resistor values stored in the NVM
Remedy: • Check if the voltage at the customerfs site is not too low. • Check the Curing resistor values, if they are too high, or there is an open circuit, replace the Curing module . • Replace the Heater Control Assembly  (60 inch.).

← Xem tất cả mã lỗi HP DesignJet L26500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie