Description: Ink Seup Failure. Ink Setup failure. The purge process has failed or has been canceled by the customer.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Try purging the Ink Supply Tubes again when the Printer has been rebooted. If the printer does not automatically go into the purge process, use the service test procedure g1.4.1 Purge tubesh . • Install new Ink Cartridges in to the Printer and try purging the Printer again. If the printer does not automatically go into the purge process, use the service test procedure g1.4.1 Purge tubesh .