Description: Rewinder Servo Shutdown. Problem with the Rewinder servo
Remedy: • Check the spindle is correctly inserted into the Printer. • Load the substrate again making sure that the media is straight and that a ebubblef is not formed on the media path. Do not rewind manual the media when the printer is checking the roll. • Check that the Spindle is not damaged and the gear at the end the spindle is correctly attached. • Perform 3.1 Rewinder Motor service test Ëpage 133. • Check the Rewinder motor cable is not damaged and is correctly connected. • Replace the Right Roll Housing assembly . • Replace the Rewinder Motor .