Code: 50:01
Description: OMAS Navigation failure
Remedy: Before preceding with corrective action for this error, it must be noted that some substrates cannot be detected by the OMAS. If the substrate has a high plastic content, is very reflective or is very smooth the OMAS will not detect it. In this case, the OMAS sensor must be disabled if the customer wants to carry on using the same media. To disable/enable the OMAS ËPage 189. It can also be disabled from the RIP.
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Clean the OMAS window ËPage 602. • Perform the OMAS check service test ËPage 189. • Replace the OMAS.
• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Clean the OMAS window ËPage 602. • Perform the OMAS check service test ËPage 189. • Replace the OMAS.