Code: 58:10
Description: Problem with the Color Sensor
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version, if not, update the firmware to the latest version. • Perform the 1.6.1 Color Sensor test . • If the error is displayed during the printerfs initialization, perform the g6.2 Color Sensor service testh . • If the error is displayed after the printer has initialized, for example when performing a Color Calibration/Linearization, perform the 5.6.3. Open/Close SOLËPage 223. • If the Color Sensor Shutter opens and closes, but the error is still displayed, replace Color Sensor Assembly . • If the Color Sensor Shutter does not open or close, replace the Color Sensor Actuator Assembly ËPage 492. • If the color sensor activator does not elevate or is broken, replace the Color Sensor Actuator Assembly ËPage 492. • If the test is unable to find a good position to open the shutter: • Replace the Color Sensor ËPage 488. • Replace the Encoder Strip ËPage 399. • If the System Error continues, replace the Carriage PCA .