Code: 63:05
Description: The raster data does not arrive quick enough. The raster data of the job is not arriving quick enough to assure correct printing conditions. If there are pauses, more than 20 seconds, while receiving information from the RIP, the printer will cancel the job to avoid problems with the temperature.
Remedy: • Check that a 1 Gigabit Ethernet Card is being used in the computer with the RIP, make sure it is correctly installed. If necessary, replace the Gigabit Ethernet Card. Do not printer via a hub, as the communication is not quick enough. • Check the RIP for any error messages. Check that the computer with the RIP application is functioning correctly. Check the HDD is not full, does the computer need to be defragmented etc. • Check the customer is printing from a computer with the minimum system requirements, check the RIP documentation for details. • Check if the RIP option “RIP while printing” is enabled. If it is enabled this could cause the computer to run slowly if it does not have sufficient power. • As a workaround the customer could reduce the resolution of the job, or increase the number of passes, in order to reduce the need for the bandwidth.