Description: Carriage servo shutdown. There is a problem with the carriage assembly.
Remedy: • Open the Window observing all safety precautions and check for any visible obstacles restricting the movement of the Carriage Assembly. If there is a wrinkled mass of media inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction. • Check that the Carriage Stopper is correctly installed Ëpage 412. • Perform the gScan Axish Diagnostic , depending on the result of the test, you may need to replace the following parts: • Scan Axis Motor Ëpage 419. • Encoder Strip Ëpage 399. • Check the cables are correctly connected between the PrintMech PCA and the Scan Axis Motor. • If the error continues, replace the Scan Axis Motor .