Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 93:11 — HP DesignJet L26500

Code: 93:11

Description: Unable to pressurize the IDS. The IDS must be pressurized but the requested pressure is not achievable in the time given (120 seconds).
Remedy: • Perform the APS service test ËPage 146 • Check the air pumps are correctly connected. • Check the cables from the PrintMech to the Air Pump are connected and not damaged. • Check that the air tubes connected to the air pressure sensor are not pinched and are correctly connected. • Check that the air tubes are connected, as this issue could cause this system error to be displayed • Check the Primer air tubes are connected and not damaged. • Tap on the relief valve with a screw driver several times to release it from a pressure blockage. • Remove ALL the Ink Cartridges and reinstall them one by one in to the Printer. • Replace the APS Assembly . • Replace the ISS PCA 

← Xem tất cả mã lỗi HP DesignJet L26500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie