Code: 24.03:00
Description: Top Cover fans not working
Causes: The firmware has detected that one or more of the Top Cover fans are not working.
Remedy: 1. Perform the All Fans service test (Page 145) to confirm that none of the Top Cover fans is working. 2. If none of the fans is working, this indicates a failure of the PrintMech PCA, or the cables from the PrintMech PCA. • Check the cables from the PrintMech PCA. • If all the cables from the PrintMech PCA to the fans are connected, replace the PrintMech PCA. 3. If at least one of the fans is working, check whether the failed fans are connected to the array. If they are connected, replace the failed fans. 4. If the error is not cleared, check all the cables from the failed fan to the PrintMech PCA.