Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 45:03 — HP DesignJet L28500

Code: 45:03

Description: Rewinder servo shutdown
Causes: The Rewinder servo has shut down.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Open the Window and check for any visible obstacles restricting the movement of the Drive Roller. If there is a wrinkled mass of substrate inside the substrate path, lift the Pinch Wheels and clear the obstruction. 3. Replace the Rewinder Motor Module.

← Xem tất cả mã lỗi HP DesignJet L28500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie