Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 15.04:00 — HP DesignJet L65500

Code: 15.04:00

Description: Drying system temperature too low
Causes: The drying system has fallen below the lower temperature limit (below 15°C).
Remedy: 1. Check that the room temperature is within the printer's operating specifications; it should be higher than 15¢XC for printer operation. If it is too low, increase the room temperature. 2. Check whether the Dryer IR sensor is dirty and requires cleaning. Observe all safety precautions while working in the area of the heaters. 3. Check that the position of the IR sensor is correct. If it is pointing to a position other than the substrate this will cause an error. 4. Perform the Heating IR sensor diagnostic check, to check the values being detected by the IR sensor. Replace the Dryer IR sensor if required. 5. Replace the cables from the PrintMech PCA to the connection box. 6. Replace the PrintMech PCA.

← Xem tất cả mã lỗi HP DesignJet L65500

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie