Description: There is a problem with the Aerosol Fan
Causes: There is no feedback signal from the Waste Management Aerosol Fan.
Remedy: 1. Replace the Waste Management module (which can be done by the customer). This is the most probable failure. 2. Check that the cable of the waste management system is correctly connected to the connector at the EBOX (which can be done by the customer). 3. Check that the cable from the EBOX to the Interconnect PCA is correctly connected. 4. Check that the cables going from the Interconnect PCA to the PrintMech PCA are correctly connected. 5. Replace the Interconnect PCA. 6. Replace the PrintMech PCA.