Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 14.88:10 — HP DesignJet LX600

Code: 14.88:10

Description: Curing power regulator overvoltage or short-circuit
Causes: Curing power regulator overvoltage or short-circuit.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Run the Monitoring Sine-waves and Resistances diagnostic test. 3. Check the cable connections. 4. Check that the input voltage is within specifications. 5. Replace the sine-wave converter.

← Xem tất cả mã lỗi HP DesignJet LX600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie