Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 21:13 — HP DesignJet LX600

Code: 21:13

Description: Problem with the Service Station
Causes: Problem with the Service Station.
Remedy: 1. Switch the power off at the rear of the printer, wait briefly, then switch it back on again. 2. Make sure that the Service Station path is clear. Remove any visible obstacles (such as screws or plastic parts) restricting the movement of the Service Station. 3. Switch the power off at the rear of the printer, remove the Printhead Maintenance Cartridge, and switch the printer on again. 4. If the error happens after printing for several hours and is cleared after power cycling, some small damage to the Encoder can cause the print carriage to lose its position little by little. The same effect could be produced by an ink or oil stain on the Encoder. Replace the Encoder Strip if it is damaged. 5. Replace the Service Station.

← Xem tất cả mã lỗi HP DesignJet LX600

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie