Causes: The waste management system cable is disconnected.
Remedy: 1. Check the connections between the Waste Management PCA and the printer. 2. Check the connections to the Interconnect PCA. 3. Check that the cable of the waste management system is correctly connected to the connector at the EBOX (this check can be done by the customer). This is the most probable cause. 4. Replace the Waste Management module (this part can be changed by the customer). 5. Check that the cable from the EBOX to the Interconnect PCA is correctly connected. 6. Check that the cables going from the Interconnect PCA to the PrintMech PCA are correctly connected. 7. Replace the Interconnect PCA. 8. Replace the PrintMech PCA.