Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 42:1:10 — HP DesignJet T520

Code: 42:1:10

Description: Carriage motor failure. Carriage Belt, Main PCA
Remedy: Onsite troubleshooting and solution (service engineer) 1. Go to the Support Menu (see Entering the support menus) and run the diagnostic 2.1 Carriage Servo, see 2.1 Carriage servo. 2. Remove the covers and check that all the cables are well connected to the Main PCA, especially the Carriage motor cable, and that none of them are damaged. If a cable is not connected then reconnect it, and power on the printer again to check whether the system error has disappeared. Important note: If any cable is damaged then order a Cable Service Kit. • Cables Sk • CQ890-67021 3. Check that the Carriage Motor belt is not broken or out of place. If the belt is OK then the Carriage Motor should be replaced, see Carriage Motor. • Carriage Motor • CQ890-67006 4. If the belt was damaged, it should be changed. Order the belt service kit, see Carriage Belt. • Belt (24) • CQ890-67059 • Belt (36) • CQ893-67016

← Xem tất cả mã lỗi HP DesignJet T520

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie