Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 01.3:10 — HP DesignJet T520 Pro

Code: 01.3:10

Description: Bundle board communication failure. Bundle FFC, Main PCA
Remedy: Remote troubleshooting (call agent) 1. Switch the power off and disconnect the power cord. Reconnect the power cord and power on the printer. 2. The call agent should arrange a service engineer visit to change the Bundle PCA and follow steps below on Onsite Troubleshooting: • Bundle Board • CQ890-67022 3. If a different system error is displayed then the call agent should perform the applicable troubleshooting procedure.
Onsite troubleshooting and solution (service engineer) 1. Remove covers and check that all the cables in the Bundle PCA and associated parts are correctly connected, and that none of them is damaged. If any cable is disconnected then reconnect it, and power on the printer again to check whether the system error has disappeared. Important note: If any cable is damaged then order a Cable Service Kit: • Cables Sk • CQ890-67021 2. Replace the Bundle PCA, see Bundle Board. • Bundle Board • CQ890-67022 3. Replace the Bundle FFC cable, see Bundle Board FFC cable. 4. Replace the Main PCA (MPCA See Main PCA) • Main PCA Basic: CQ891-67003 • Main PCA Pro: CQ890-67023

← Xem tất cả mã lỗi HP DesignJet T520 Pro

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie