Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 23:10 — HP DesignJet T7200

Code: 23:10

Description: Air Pressure System (APS)
Causes: Air Pressurization System failure; unable to pressurize or depressurize tubes
Remedy: • Turn the power off at the rear of the printer and disconnect the power cord. Reconnect the power cord and turn on the printer. • Check that the APS cable is not damaged and is correctly connected to the PrintMech PCA. • Check that the air tubes are properly connected and are not kinked or pinched. • Replace the APS Assembly

← Xem tất cả mã lỗi HP DesignJet T7200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie