Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 22.1:YZ — HP DesignJet T790

Code: 22.1:YZ

Description: Left Ink Supply Station error, module 1
Remedy: 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check that the cables between the Ink Supply Station and the Engine PCA are not damaged and are properly connected. In case of any damage replace the cable. NOTE: Check the Data Harness and ISS Harness Cable are connected in the right position onto the Engine PCA. These two connectors can be swapped by mistake causing a SE 22.1:10. Check the instructions in Connecting the Data Harness and ISS Harness Cable 3. Perform the Ink Delivery System diagnostic test to troubleshoot the problem further. See Ink Delivery System (IDS) Test. 4. Replace the Left Ink Supply Station. See Left Ink Supply Station. 5. Replace the Engine PCA. See Starwheel Assembly.

← Xem tất cả mã lỗi HP DesignJet T790

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie