Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 41:YZ — HP DesignJet T790

Code: 41:YZ

Description: Electrical fault or current limit in Media-Axis Motor
Remedy: 1. Switch the power off from the back of the product and disconnect the power cord. Reconnect the power cord and power on the product. 2. Check for any visible obstacles restricting the movement of the Media Advance Roller. If there is a wrinkled mass of paper inside the paper path, lift the Pinch wheels (using Media Lever) and clear the obstruction. 3. Perform the Paper Drive diagnostic test to troubleshoot the problem furthe. See Paper Drive Test. 4. Perform the Rewinder diagnostic test to troubleshoot the problem further. See Rewinder Test. 5. Check that the Media Advance Drive cable is not damaged and is correctly connected to the Engine PCA. 6. Replace the Media Advance Drive. See Media Advance Drive. 7. Replace the Engine PCA. See EE Box.

← Xem tất cả mã lỗi HP DesignJet T790

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie