Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 45.1:YZ — HP DesignJet T790

Code: 45.1:YZ

Description: An error with the Rewinder 1 System (Upper Rewinder) has been detected.
Remedy: 1. Switch the power off from the back of the product and disconnect the power cord. Remove the paper from Roll 1. Reconnect the power cord and power on the product. 2. Check that the Rewinder 1 cable is not damaged and is correctly connected to the Engine PCA. 3. Check that the Upper Right Roll Support is correctly attached to and aligned with the Right Cover. 4. Perform the Rewinder diagnostic test to troubleshoot the problem further. See Rewinder Test. 5. Replace the Upper Right Roll Support. See Roll Support, Upper Right.

← Xem tất cả mã lỗi HP DesignJet T790

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie