Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0021-0132 — HP DesignJet T830 MFP

Code: 0021-0132

Description: Weak primer motor or underpowered motor
Causes: Print Bundle PCA
Remedy: Remote troubleshooting (call agent)1. Switch the power off and disconnect the power cord. Reconnect the power cord and power on the printer.2. If the issue persists, the call agent should arrange a service engineer visit to change the Priming motor, and follow the Onsite troubleshooting below: Priming motor assembly3. If a different system error is displayed then the call agent should perform the applicable troubleshooting procedure.Onsite troubleshooting and solution (service engineer)1. Switch the power off and disconnect the power cord. Reconnect the power cord and power on the printer.2. Remove the covers and check that the cable of the Prime Pump is connected to the Pump and Print Bundle PCA and it is not damaged. Check also for disconnected air tubes, from Prime pump up to carriage couplingIMPORTANT:If the cable is not connected then reconnect it, and power on the printer again to check whether the error has disappeared. IMPORTANT: If the cable is damaged then order a Cable Service Kit: Cables Sk3. Replace the Pump motor, see Prime Pump. Prime pump 4. Replace the Print bundle PCA, see Bundle Board.

← Xem tất cả mã lỗi HP DesignJet T830 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie