Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0043-0017 — HP DesignJet T830 MFP

Code: 0043-0017

Description: Unable to move Pick Servo or no feedback received.
Causes:
Remedy: Onsite troubleshooting and solution (service engineer)1. Remove the covers and check that all the cables are well connected to the Printer Bundle Board (right side of the unit), specially the pick motor cable, and none of them are damaged. If any cable is not connected, then reconnect it, and power on the printer again to check whether the system error has disappeared. Check right hand gear train for blockage or damage.IMPORTANT:If any cable is damaged, then order a Cable Service Kit: Cables Sk2. Replace the Pick motor.

← Xem tất cả mã lỗi HP DesignJet T830 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie