Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 0955-0050 — HP DesignJet T830 MFP

Code: 0955-0050

Description: Line sensor failure
Causes: Carriage PCA, Trailing Cable, Main PCA
Remedy: Remote troubleshooting (call agent)1. Switch off the printer, and disconnect the power cord. Reconnect the power cord and power on the printer.2. The call agent asks the customer to go to Support Menu by pressing the Power key continuously for 15 seconds.3. Go to Diagnostic Menu and run the Line Sensor diagnostic, see 4.7 Line Sensor (or ZIM, Spot sensor). 4. The call agent should arrange a service engineer visit to change the Line Sensor assembly; follow the onsite troubleshooting below. Line Sensor5. If a different system error is displayed then the call agent should perform the applicable troubleshooting procedure.Onsite troubleshooting and solution (service engineer)1. Go to Support Menu (see Entering the support menus) and run the Line Sensor diagnostic, see 4.7 Line Sensor (or ZIM, Spot sensor). 2. Remove the covers and check that the cable of the line sensor is connected to the Carriage PCA and it is not damaged. If the cable is not connected then reconnect it, and power on the printer again to check whether the error has disappeared.IMPORTANT:If the cable is damaged then replace the Line Sensor, see Carriage Line Sensor. Line Sensor3. Clean the Line Sensor and try again, see Clean the Carriage Line Sensor. 4. Replace the Carriage Assembly, see Carriage and Belt. Carriage assembly w/belt (36)5. Replace the Main PCA, see Main PCA Main PCA

← Xem tất cả mã lỗi HP DesignJet T830 MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie