Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 24:YZ — HP DesignJet Z3100

Code: 24:YZ

Description: Ink Setup failure (you must bring purgers).
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Insert the new purgers, reconnect the power cord and power On the Printer. • Perform the Ink Delivery System diagnostic test in order to check that the bongos (pushers) go up and down to pressurize ink in the tubes and the Out of Ink sensors work properly. • Try purging the Ink Supply Tubes again once the Printer has been restarted. • If the diagnostic test does not find any problem, install new cartridges in the printer and try purging the Ink Supply Tubes again. It could be that one of the cartridges is defective. • If the problem persists, replace the Ink Supply Tubes. • Replace the Formatter.

← Xem tất cả mã lỗi HP DesignJet Z3100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie