Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 01.2:YZ — HP DesignJet Z3200

Code: 01.2:YZ

Description: Failure reading acumen chip of an Ink Supply Station.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that there are not two cartridges of the same color installed. • Perform the Ink Delivery System diagnostic test. – If the test finds that the ink supply is defective, replace it. – If the test does not find any errors, remove all the ink supplies from the ISS and reboot the printer. • Install the ink cardtriges with the printer booted in normal mode. Use the replacement option available from the Front Panel and install the cartridges one by one. If an error appears after installing a supply, the last supply you installed is defective. Replace it. • If the System Error continues, replace the Main PCA. • If the System Error continues, replace the Left Ink Supply Station. • If the System Error continues, replace the Right Ink Supply Station.

← Xem tất cả mã lỗi HP DesignJet Z3200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie