Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 86:01 — HP DesignJet Z3200

Code: 86:01

Description: Problem moving the carriage, most likely due to a paper jam.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Open the Window and check for any visible obstacles restricting the movement of the carriage. If there is a wrinkled mass of media inside the paper path, lift the Pinch wheels (using the Media Lever) and clear the obstruction. • If there is no paper jam or obstacle blocking the carriage movement perform the following: – Clean the encoder strip. – Check the belt assembly. – All cables and connections between the Carriag PCA, Scan Axis Motor, and Main PCA. – Oil the carriage rails. • Perform the Scan Axis Diagnostic Test . Page 3-6. • If the diagnostic test does not find any specific error, replace the Carriage Assembly. • Replace the Belt Assembly. • Replace the Scan Axis Motor. • Replace the Main PCA.

← Xem tất cả mã lỗi HP DesignJet Z3200

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie