Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 01.2:10 — HP DesignJet Z6100

Code: 01.2:10

Description: ISS PCA problem.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Low humidity in the customerfs environment can be a cause of this system errror. You can check the humidity by using the EWS. Click on the ePrinter Information Pagef and select the eCurrent Infomationf tab. The humidity level will be displayed, a low level that would cause the error is around -20%. To solve errror upgrade with the latest firmware, at least 7.0.0.3. If the printer cannot be upgraded using the normal process, upgrade using the .plt emergency file process . • If the System Error continues, replace the Ink Supply Tubes and Trailing Cable .

← Xem tất cả mã lỗi HP DesignJet Z6100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie