Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 32:01.1 — HP DesignJet Z6100

Code: 32:01.1

Description: This system error occurrs when there is a small amount of paper printed (less than 79 inches (200cm) long.
Remedy: • Check there is no obstacle between the Take-up reel optical sensors. • Check the paper is attached to the TUR spindle. • Check the TUR switch is in the correct position. • If needed, use the TUR arrow keys to wind paper before resume printing. • To resume printing, press OK.

← Xem tất cả mã lỗi HP DesignJet Z6100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie