Description: Electrical fault in Carriage Motor or starting the Scan Axis or Homing Scan Axis.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Scan-Axis Motor cable is not damaged and is correctly connected to the PrintMech PCA. • Clean the Encoder Strip using a lint free cloth dampened with tap water, then reset the counter (Setup > Resets > Encoder cleaning) Ë See the instructions provided in the User Maintenance Kit and • Replace the Scan-Axis Motor . • If the System Error continues, replace the PrintMech PCA