Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 50:03 — HP DesignJet Z6100

Code: 50:03

Description: FW error in DSP or Engine code or link is broken between PCAs.
Remedy: • There is a tendancy for this system error to being displayed because of cables becoming disconnected. Check all relavant cables are correctly connected, especially the cables from the OMAS Controller and the Main PCA and the Sausalito PCA. • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the correct type of Main PCA is installed, Designjet Z6100 NOT Designjet 4x00. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Replace the OMAS Controller Card  • Replace the OMAS Module 

← Xem tất cả mã lỗi HP DesignJet Z6100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie