Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 58:10 — HP DesignJet Z6100

Code: 58:10

Description: An error detected with the Color Sensor.
Remedy: • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest firmware version. If not, update the Firmware to the latest version. • Perform the Color Sensor test. • If the error is displayed during the printerfs initilization, perform the Color Sensor Test from the diagnostic boot mode . • If the error is displayed after the printer has initialized, for example when performing a Color Calibration/Linearization, perform the Spectrophotometer test . • If the Color Sensor Shutter opens and closes, then replace Color Sensor Assembly . • If the Color Sensor Shutter is not activated: • If the Color Sensor Actuator Lever does not elevate or is broken: 1. Replace the Color Sensor Actuator Assembly . 2. Clean the Encoder Strip using a lint free cloth with damp water . • If the SOL Actuator Lever elevates but does not always catch the shutter, clean the Encoder Strip using a lint free cloth with damp water . • If the System Error continues, replace the Carriage PCA .

← Xem tất cả mã lỗi HP DesignJet Z6100

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie