Code: 86:01
Description: Carriage servo shutdown.
Remedy: • Open the Window and check for any visible obstacles restricting the movement of the Carriage Assembly. If there is a wrinkled mass of media inside the paper path, lift the Pinchwheels (using the Media Lever) and clear the obstruction. • Check that the Carriage Stopper is correctly installed (Refer to Carriage Disassembly Instructions , step <cross reference>22.). • Perform the gScan-Axish Diagnostic () to further troubleshoot the error code. • Clean the Encode Strip using a lint free cloth dampened with water. • Check the cables are correctly connected between the PrintMech PCA and the Scan Axis Motor. • If the System Error continues, replace the Scan-Axis Motor .