Code: 87:01
Description: This error is displayed when there is a need for the customer to clean the Encoder Strip. Full cleaning instructions come with the User’s Maintenance Kit. This message is displayed after a predefined quantity of ink has been consumed by the printer. At the time of firmware revison 7.0.0.3 the quantity of ink used before the 87:01 message is displayed is 10 liters.
Remedy: • Clean the Encoder Strip using a lint free cloth dampened with tap water, then reset the counter. (Setup > Resets > Encoder cleaning) Ë See the instructions provided in the User Maintenance Kit (P/N Q6715A). Refer to NOTE: This operation is a standard maintenance procedure for the customer. It is fully documented in the User Maintenance Kit. If the User Maintenance Kit is not available the customer must purchase another kit (Q6715A).