Code: 06
Image:
Description: Firmware Error.
Note the LED patterns on the BiTronics error code.
Note the LED patterns on the BiTronics error code.
Remedy: 1. Power cycle the printer by unplugging the printer and plugging it back in.
2. Disconnect the parallel I/O cable and try running a printer self test. Reconnect the parallel cable if the self test is successful and try host/printer communications again.
3. If the error persists, replace the Formatter PCA.
2. Disconnect the parallel I/O cable and try running a printer self test. Reconnect the parallel cable if the self test is successful and try host/printer communications again.
3. If the error persists, replace the Formatter PCA.