Code: 15
Image:
Description: NVRAM Error
(68 error)
(68 error)
Remedy: Press GO to clear the message and continue printing. An error occurred in the printer’s nonvolatile memory and one or more printer settings has been reset to its factory default.
1) Print a configuration page and check the printer settings to determine which values have changed.
2) While turning the printer on, hold JOB CANCEL until all the lights come on and stay on. This will clean up the NVRAM by removing old areas that are not being used.
3) Replace the Formatter.
1) Print a configuration page and check the printer settings to determine which values have changed.
2) While turning the printer on, hold JOB CANCEL until all the lights come on and stay on. This will clean up the NVRAM by removing old areas that are not being used.
3) Replace the Formatter.