Code: 32
Image:
Description: General Fatal Error
Remedy: 1) Cycle power.
2) Do the following:
a) Turn off the printer.
b) Remove all accessories (for example, Font DIMM, I/O cables, EIO card).
c) Turn on the printer. If the error recurs, go to step 3. If the error does not recur, go to step 2d.
d) Turn off the printer and add one of the removed accessories.
e) Turn on the printer. If the error recurs, replace the accessory most recently added. If the error does not recur, repeat steps 2d and 2e until all accessories are installed.
3) Replace the Formatter.
4) Replace the Engine Controller PCB.
2) Do the following:
a) Turn off the printer.
b) Remove all accessories (for example, Font DIMM, I/O cables, EIO card).
c) Turn on the printer. If the error recurs, go to step 3. If the error does not recur, go to step 2d.
d) Turn off the printer and add one of the removed accessories.
e) Turn on the printer. If the error recurs, replace the accessory most recently added. If the error does not recur, repeat steps 2d and 2e until all accessories are installed.
3) Replace the Formatter.
4) Replace the Engine Controller PCB.