Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13 — HP LaserJet 4MP

Code: 13

Display: 13 Paper Jam
Description: Check the paper, make sure it meets the paper specifications for your printer. Tractor feed paper with the edges ripped off doesn't seem to work very well. Extremely heavy or thick paper is also a problem. Check the HP paper specification guide for more info. Be careful with labels, use only labels designed to take the heat generated by the fuser assembly. Regular labels my "ooze" adhesive as they pass through the fuser assembly and literally gum up the works! Also check for any partially peeled labels, this can be a disaster if they come off inside the printer.
Is the paper size correct? Is the software set for the size you're using? Is the menu set for the size you're using? Check these items. If the software tells the printer to expect a different size (legal, A4, COM10) than the tray available, you will get an error. This can happen when printing a FAX document formatted for A4 size paper.
You could also have a defective or dirty exit sensor. Replace or clean as needed.
Make sure the paper cassettes are installed correctly. A buildup of toner on the edges of the tray which slide into the printer can sometimes cause problems. Take a sharp tool, like a razor blade and scrape the buildup off these edges.
Bad drive gears. Again on the LJII/III we are starting to see more and more failures of the gear drive assembly. A broken tooth on one gear is all it takes. Replace this as an assembly.
Listen for the motor operation, make sure it's operational. If not replace the motor or drive circuit as required.

← Xem tất cả mã lỗi HP LaserJet 4MP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie