Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 11 — HP LaserJet 5000

Code: 11

Display: 11 Paper Out
Description: Paper tray empty or not seated correctly. A buildup of toner on the edges of the tray which slide into the printer can sometimes cause problems. Take a sharp tool, like a razor blade and scrape the buildup off these edges.
Sensor Arm Stuck or Broken - check for free movement of the sensor arm. Sensor flag can get knocked out of place when a paper jam occurs and the tray is pulled out abruptly. Most times this can simply be reinstalled. If it's broken, you will need to replace the sensor flag.
Defective Tray Size Sensing or Configuration - Most trays have tabs which depress a series of switches when installed. Verify that the tabs aren't damaged and that the tray switches located in the printer are not damaged. You can depress these by hand and hear them click. Occasionally the contact for the micro switch will get bent and will have to be replaced. Also verify the configuration through the menus on the printer.
Defective Paper Control Sensor PCB - These do fail and will need to be replaced.

← Xem tất cả mã lỗi HP LaserJet 5000

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie