Code: -
Display: Install Transfer Unit
Description: The transfer unit is either not installed or not installed correctly.
Remedy: 1. Open the right door. 2. Install the ITB. NOTE: If the ITB is already installed, remove it, and then reinstall the ITB. 3. Close the right door. 4. If the error persists, use the ITB alienation sensor (SR17) in the manual sensor test to verify that the sensor is properly functioning. If it is not, replace the ITB. 5. If the error persists, use the ITB alienation test in the component test to verify that the ITB alienation mechanism is properly functioning. If it is not, replace the ITB.