Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B2.Az — HP LaserJet Enterprise 500 Color MFP M575

Code: 13.B2.Az

Display: 13.B2.Az Jam in right door
Description: Print input stay jam 1. This paper stayed at the registration sensor for the designated amount of time after it reached the registration sensor. This jam occurs when the paper is longer than legal size by 40 mm, or more paper is detected as a result of the actual length detection.
Remedy: Clear the jam: 1. Open the right door. 2. Remove any paper. 3. Remove all paper from the registration area. 4. Lift the green guides to locate the paper. 5. If you cannot access the paper, locate the rollers (covered by paper) and roll them back or forward to move the paper. 6. Close the right door. If the jam persists: 1. Make sure the paper type is supported. 2. Open Tray 2 and check for paper jams. 3. Check for torn pieces of paper in the paper path. 4. Remove any paper in the fuser area. 5. Make sure the rollers are installed correctly in the trays. 6. Lift the green guides to check the paper path. 7. Locate the rollers under the paper and roll them back to attempt to gain access to the top of the page to prevent tearing of the paper.

← Xem tất cả mã lỗi HP LaserJet Enterprise 500 Color MFP M575

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie