Code: 13.A4.D4
Display: 13.A4.D4 Jam in tray 4
Description: No pick jam. This jam occurs when the paper does not reach the Tray 4 feed sensor (SR1PF) in the designated amount of time (for the following optional tray configurations). Optional Tray Configurations - 1x500 stackable only - 1x500 non-stackable only - 3x500 non-stackable only - HCI non-stackable only - 1x500 stackable + 1x500 non-stackable - 1x500 stackable + HCI non-stackable No pick jam- This jam occurs when the paper does not reach the Tray 4 feed sensor (PS3302) in the designated amount of time (HCI only optional tray configuration).
Remedy: 1. Open Tray 4, remove any jammed paper, and then close Tray 4. 2. For the following input device configurations: 1x500 paper feeder, 1x500 paper deck, 3x500 paper deck, 1x500 paper feeder with 1x500 paper deck, and 1x500 paper feeder with 3500 sheet HCI, HCI only; do the following. a. Inspect the Tray 4 pick, feed and separation rollers. Clean or replace them if necessary. b. Check the connectors at the feed sensor, solenoid, feed motor, and the controller PCA. c. Use the Tray/bin manual sensor tests to toggle the Tray 4 feed sensor. If the sensor is not properly functioning, replace the Tray 4 paper pickup assembly. d. Use the Components tests to activate the Tray 4 pickup motor (listen for the motor to rotate). If the motor is not properly functioning, replace the Tray 4 pickup motor.