Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.A5.D5 — HP LaserJet Enterprise 700 M725

Code: 13.A5.D5

Display: 13.A5.D5 Jam in tray 5
Description: No pick jam. This jam occurs when the paper does not reach the Tray 5 feed sensor in the designated amount of time. Depending on the input device configuration this could be the second 500 sheet paper feeder, the 1x500 sheet paper deck or 3x500 paper deck, the right or left tray of the HCI, or the HCI exit media feed sensor. (SR81-PD3x500, PS3305-HCI, SR1 -1x500PD, PS3302-HCI, PS3301-HCI).
Remedy: 1. Open Tray 5, remove any jammed paper, and then close Tray 5. 2. Inspect the connectors at the feed sensor and controller PCA for Tray 5. 3. Check the connectors at the feed sensor, solenoid, feed motor, and the controller PCA. 4. Use the Tray/bin manual sensor tests to toggle the Tray 5 feed sensor and HCI exit media feed sensor (PS3301). If the Tray 5 feed sensor or lever are not properly functioning, replace the Tray 5 paper pickup assembly. If the HCI media feed sensor is not properly functioning, replace the HCI crossing paper feed assembly. 5. Use the Components tests to toggle the Tray 5 solenoid (listen for the solenoid to move). If the solenoid is not properly functioning, replace the Tray 5 paper pickup assembly. 6. Use the Components tests to activate the Tray 5 pickup motor (listen for the motor to rotate). If the motor is not properly functioning, replace the Tray 5 pickup motor.

← Xem tất cả mã lỗi HP LaserJet Enterprise 700 M725

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie