Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.A7.D5 — HP LaserJet Enterprise 700 M725

Code: 13.A7.D5

Display: 13.A7.D5 Jam tray 4 (inner flap)
Description: This jam occurs when the leading edge passes the tray 5 feed sensor (PS3305), but does not reach the HCI exit sensor (PS3301) in the designated amount of time.
Remedy: 3x500 paper deck installed. 1. Open Tray 4 and the inner flap, remove any jammed paper, and then close Tray 4 and the inner flap. 2. Inspect the HCI Tray 5 pick, feed and separation rollers. Clean or replace them if necessary. 3. Inspect the connectors at the controller PCA and paper feed crossing for the HCI. 4. Use the Tray/bin manual sensor tests to toggle the HCI exit sensor (PS3301). If the sensor or lever are not properly functioning, replace the HCI crossing assembly.

← Xem tất cả mã lỗi HP LaserJet Enterprise 700 M725

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie