Code: 60.00.02
Display: 60.00.0Y Tray <Y> lifting error
Description: The indicated tray has not lifted into the paper feed position.
Media input Tray 2 lift-up motor (M4) failure
Media input Tray 2 lift-up motor (M4) failure
Remedy: 1. Use the Tray 2 paper surface sensor (SR10) test in the Tray/Bin manual sensor test to verify that the sensor is properly functioning. If it is not, replace the lifter drive assembly. 2. Open and close Tray 2 and listen at the back of the product for the sound of the lifer motor (M4) operating. If it does not operate, replace the lifter drive assembly. 3. If the product has been serviced, check the intermediate connector (J56) and the connector (J51) on the DC controller PCA. 4. If the error persists, replace the cassette tray.