Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.A4.D4 — HP LaserJet Enterprise 700 M775 color MFP

Code: 13.A4.D4

Display: 13.A4.D4
Description: Late to tray 4 feed sensor jam, from Tray 4. No-pick jam from Tray 4.
500-sheet trays • The leading edge of paper fed from Tray 4 does not reach Tray 4 SR1 in specified amount of time.
High capacity input feeder • Tray 4 media feed sensor PS3305 does not detect the leading edge of paper within a specified period, including two times retry, after the HCI left cassette pickup solenoid is turned on.
Remedy: 500-sheet trays
a. Open Tray 4, clear any jammed paper, and then close the tray. b. Open the lower-right door, clear any jammed paper, and then close the door.
High capacity input feeder
a. Open Tray 4, clear any jammed paper, and then close the tray. b. Open Tray 3, release the jam access tray and clear any jammed paper, and then close the tray.
500-sheet trays and high capacity input feeder
1. Inspect the Tray 4 pick, feed and separation rollers. Clean or replace if necessary. 2. Check the connectors at the feed sensor, solenoid, feed motor, and the controller PCA. 3. Use the Tray/bin manual sensor tests to toggle the Tray 4 feed sensor. If the sensor or lever is not properly functioning, replace the Tray 4 paper pickup assembly. 4. Use the component tests to activate the Tray 4 solenoid (listen for the solenoid to activate). If the solenoid is not properly functioning, replace the Tray 4 paper pickup assembly. 5. Use the component tests to activate the Tray 4 motor (listen for the motor to activate). If the motor is not properly functioning, replace the Tray 4 pickup motor.

← Xem tất cả mã lỗi HP LaserJet Enterprise 700 M775 color MFP

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie