Thương hiệu phân phối chính hãng
Giỏ hàng

Mã lỗi 13.B2.AD — HP LaserJet Enterprise Flow MFP M575

Code: 13.B2.AD

Display: 13.B2.AD Jams in right door
Description: Print input stay jam 1. The paper stayed at the registration sensor for the designated amount of time after it reached the registration sensor. This jam occurs when the paper is longer than legal size by 40 mm, or more paper is detected as a result of the actual length detection.
Remedy: Clear the jam: 1. Open the right door. 2. Remove any paper. 3. Remove any paper from the fuser area. 4. Lift the green guides to remove paper from the duplex area. 5. Close the right door. If the jam persists: 1. Make sure the paper type is supported. 2. Print using manual duplex. 3. If the jams occur only when duplexing, replace the right door.

← Xem tất cả mã lỗi HP LaserJet Enterprise Flow MFP M575

Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin Đăng ký nhận bản tin
Đăng ký nhận bản tin
Nhận ưu đãi sớm nhất khi chương trình diễn ra

Đăng ký nhận bản tin

Việc cho phép sử dụng cookie sẽ giúp cải thiện trải nghiệm của bạn trên trang web này. Chính sách cookie