Code: 13.FF.FF
Display: 13.FF.FF Jam in right door
Description: Residual media in paper path jam. The paper exists at the fuser output sensor or the fuser loop sensor, or the duplexer refeed sensor when the power is turned on or the door is closed. This jam occurs when the paper stays for more than the designated amount of time continuously at any of the sensors when executing the automatic media flush.
Remedy: Clear the jam: 1. Open the right door and remove all paper. 2. Remove the fuser and any paper in the fuser area. 3. Remove any paper inside the fuser. 4. Reinstall the fuser. 5. Remove any other paper found. 6. Close the right door. If the jam persists: 1. Clear jams in the right door and fuser area. 2. If possible, view the event log. 3. Conduct a manual sensor test to verify that the sensors are working correctly. 4. Replace any failed sensors or assemblies.