Mã lỗi 66.00.79 — HP LaserJet Enterprise Flow MFP M880
Code:
66.00.79
Display: 66.00.79
Description: This is a JetLink communication error. The product has lost JetLink communication with the output device.
Remedy: 1. Turn off the product, and then disconnect the finisher. 2. Make sure that the grounding-frame assembly (the bar with the wheel located between the engine and the finisher) is in the down position with the wheel touching the floor and that the grounding plate is not damaged. NOTE: The grounding-frame assembly is in the up position when the finisher is shipped. It must be lowered when the finisher is installed. 3. Reconnect the finisher to the product. 4. Inspect and reconnect the JetLink cable (power and communication cable) from the finisher to the product. 5. Turn the product on. 6. If the error persists, replace the stacker controller PCA. If the error was caused by exchanging finishers while the product was still on, perform the following steps: 1. Turn the product off, and then disconnect the finisher. 2. Make sure that the finisher is designed to be used with the product. 3. Reconnect the finisher to the product. 4. Turn the product on..